Oil Plus 2C A - Komponens / Citrine - R307 - 100 ml

Oil Plus 2C  A - Komponens / Citrine - R307 - 100 ml
Oil Plus 2C  A - Komponens / Citrine - R307 - 100 ml
Oil Plus 2C  A - Komponens / Citrine - R307 - 100 ml
Oil Plus 2C  A - Komponens / Citrine - R307 - 100 ml
Oil Plus 2C  A - Komponens / Citrine - R307 - 100 ml
Oil Plus 2C  A - Komponens / Citrine - R307 - 100 ml
Package
Color
Netto 12 EUR + VAT 3 EUR

Protection and colouring in ONE single layer

Rubio Monocoat Oil Plus 2C is the latest generation of wood preservative oils that color and protect wood in a single coat, preserving the natural appearance of its surface and veins. It consists of two components:

RMC Oil Plus 2C Component A (oil) can also be used on its own without the setting accelerator. In this case, we recommend it for the treatment of walls, furniture and surfaces exposed to less mechanical stress.

Drying time is longer without the use of a setting accelerator, approx. 10 days.

  • Fit for food and other certificates
  • Free from VOC (0%
  • Minimum material requirements, high coverage: ~ 30-50 m² / L
  • Fast curing: 80% - in 2 days
  • Short "drying-care time": after five days, the surface could have been cleaned with soap and water
  • Packaging: 20 ml, 100 ml, 275 ml, 1 L, 2.75 L, 5 L (component A)

For more information, please visit our website or colours.

Info
Details
Similar products
Instructions
Details
  • It protects and colours the wood in a single layer
  • 40 base colours; they can be mixed, so the colour range is endless
  • Improves the natural appearance of wood
  • Easy to care for
  • Apply without overlap and starting lines
  • Provides long-term protection
  • It can be used on almost all types of wood, furniture, stairs and floors
  • Very resistant
  • Water and heat resistant, also ideal for wood panelling in kitchens and bathroom

Technical features

RMC Oil Plus 2C (A)

  • Physical state at 20 ° C: liquid
  • Odour: natural oil
  • Flash point:> 99 ° C
  • Density:> 0.9 kg / L
  • VOC content: 0 g / L

Material requirements

It can be 30-50 m2 / L. It depends on the type of wood and the application process of the material. Consumption in industrial applications: 60-80 m2 / L. The data is for information only. The result depends on the type of wood and the method of the surface treatment. It is always advisable to prepare a sample to calculate the exact use.

Note: Oil Plus 2C should be used within 4-6 hours after mixing.

Storage

The product can be stored for up to 36 months in dry conditions and the original packaging. Store the product in a frost-free place.

Info
Package
100 ml
Color
Citrine - R307
Terméknév
Oil Plus
Article No.
RINOAK0010P2C2200
Weight
118.7 g/db
Similar products
Netto 99 EUR + VAT 27 EUR
NEW
Netto 105 EUR + VAT 28 EUR
Instructions

For furniture, stairs and worktops

  1. Sand the surface scratch-free up to a grain size of 120. (Tip: The finer the sand, the lighter the color and the longer it takes to set the oil on the wood surface! 10-15 minutes for 120 grit, ~ 20 minutes for 150 grit.)
  2. Vacuum the surface thoroughly, then remove any dust residue with Rubio Monocoat Cleaner and allow the surface to dry completely. (Check the Rubio Monocoat Cleaner data sheet before use).
  3. Component A is stirred until a homogeneous mixture is obtained. Thoroughly mix the two components by adding 300 ml of B Component Curing Accelerator to 1 L of A-Component Oil.
    Lubricate a small amount of the mixed oil and apply to the surface:
  4. Allow the oil to react with the surface for 5-10 minutes, then wipe off any excess oil with a clean cotton cloth or white Pad within 15 minutes of first application.
  5. As a final touch, wipe the surface with a cotton cloth under the sander until the entire surface is dry to the touch.

Applying oil with RMC Scrubby Pad:

Applying the oil with a spatula:

Applying the oil with an eccentric sander: