Oil Plus 2C Set / Pure - R101 - 1.3 L

Oil Plus 2C Set / Pure - R101 - 1.3 L
Oil Plus 2C Set / Pure - R101 - 1.3 L
Oil Plus 2C Set / Pure - R101 - 1.3 L
Oil Plus 2C Set / Pure - R101 - 1.3 L
Oil Plus 2C Set / Pure - R101 - 1.3 L
Oil Plus 2C Set / Pure - R101 - 1.3 L
Oil Plus 2C Set / Pure - R101 - 1.3 L
Oil Plus 2C Set / Pure - R101 - 1.3 L
Oil Plus 2C Set / Pure - R101 - 1.3 L
Oil Plus 2C Set / Pure - R101 - 1.3 L
Package
Color
Netto 108 EUR + VAT 29 EUR

Protection and colouring in ONE single layer

RMC Oil Plus 2C is the latest generation of wood preservative oils that color and protect wood in a single coat, preserving the natural appearance of its surface and veins.

It consists of two components, which can be purchased separately:

By using the two components together, the drying time will be significantly shortened (to 5 days) and the surface will be more durable, therefore it is absolutely recommended to use both components in case of surfaces exposed to higher mechanical stress (eg floors, worktops).

Thanks to the special molecular bonding technology, it can be applied without overlap.

It can be applied to floors, furniture, stairs, even in the kitchen, as it is ideal for handling worktops and other surfaces that come into contact with food.

  • Fit for food and other certificates
  • Free from VOC (0%)
  • Minimum material requirements, high coverage: ~ 30-50 m² / L
  • Fast curing: 80% - in 2 days
  • Short "drying-care time": after five days, the surface could have been cleaned with soap and water

For more information, please visit our website or colours.

Info
Details
Similar products
Instructions
Details

Product features:

  • It protects and colours the wood in a single layer
  • 40 base colours; they can be mixed, so the colour range is endless
  • Improves the natural appearance of wood
  • Environmentally friendly: 0% VOC - Does not contain water or solvents
  • Easy to care for
  • Apply without overlap and starting lines
  • Provides long-term protection
  • Very economical use: ~ 30 - 50 m2 / L
  • It can be used on almost all types of wood, furniture, stairs and floors
  • Very resistant
  • Water and heat resistant, also ideal for wood panelling in kitchens and bathroom
  • Very fast curing: 80% - within 2 days
  • Short "drying-care time": the surface can be cleaned with soap and water after as little as 5 days

Technical features

RMC Oil Plus 2C (Component A)

  • Physical state at 20 ° C: liquid
  • Odour: natural oil
  • Flash point:> 99 ° C
  • Density:> 0.9 kg / L
  • VOC content: 0 g / L

RMC Accelerator (Component B)

  • Physical state at 20 ° C: liquid
  • Colour: colourless
  • Odour: odourless
  • Flashpoint [° C]:> 160 ° C (with closed cap)
  • VOC content: 0 g / L

Material requirements

It can be 40-50 m2 / L. It depends on the type of wood and the application process of the material. Consumption in industrial applications: 60-80 m2 / L. The data is for information only. The result depends on the type of wood and the method of the surface treatment. It is always advisable to prepare a sample to calculate the exact use.

Note: Oil Plus 2C should be used within 4-6 hours after mixing.

Storage

The product can be stored for up to 36 months in dry conditions and the original packaging. Store the product in a frost-free place.

Info
Package
1.3 L
Color
Pure - R101
Terméknév
Oil Plus
Article No.
RINO2C0130R101
Weight
1.5 kg/db
Similar products
Netto 116 EUR + VAT 31 EUR
Instructions

For furniture, stairs and worktops

  1. Sand the surface scratch-free up to a grain size of 120. (Tip: The finer the sand, the lighter the color and the longer it takes to set the oil on the wood surface! 10-15 minutes for 120 grit, ~ 20 minutes for 150 grit.)
  2. Vacuum the surface thoroughly, then remove any dust residue with Rubio Monocoat Cleaner and allow the surface to dry completely. (Check the Rubio Monocoat Cleaner data sheet before use).
  3. Component A is stirred until a homogeneous mixture is obtained. Thoroughly mix the two components by adding 300 ml of B Component Curing Accelerator to 1 L of A-Component Oil.
    Lubricate a small amount of the mixed oil and apply to the surface:
  4. Allow the oil to react with the surface for 5-10 minutes, then wipe off any excess oil with a clean cotton cloth or white Pad within 15 minutes of first application.
  5. As a final touch, wipe the surface with a cotton cloth under the sander until the entire surface is dry to the touch.

Applying oil with RMC Scrubby Pad:

Applying the oil with a spatula:

Applying the oil with an eccentric sander:

For floor treatment

  1. Sand the surface scratch-free up to a grain size of 120. (Tip: The finer the sand, the lighter the color and the longer it takes to set the oil on the wood surface! 10-15 minutes for 120 grit, ~ 20 minutes for 150 grit.)
  2. Vacuum the surface thoroughly, then remove any dust residue with Rubio Monocoat Cleaner and allow the surface to dry completely. (Check the Rubio Monocoat Cleaner data sheet before use).
  3. Component A is stirred until a homogeneous mixture is obtained. Thoroughly mix the two components by adding 300 ml of B-Component Curing Accelerator to 1 L of A-Component Oil.
  4. Lubricate a small amount of the mixed oil and spread on the surface with a spatula or Scrubby Pad.
  5. Allow the oil to react with the surface for 5-10 minutes, then wipe off any excess oil with a clean cotton cloth attached to a polishing machine with a red or white Pad within 15 minutes of first application.
  6. As a final touch, wipe the surface with a cotton cloth under the sander until the entire surface is dry to the touch.

Tip

RMC Oil Plus 2C should be used within 4-6 hours of mixing, so be sure to mix only as much oil as you can be sure to use within this time interval.