Hybrid Wood Protector / Natural - E003 - 100 ml

Hybrid Wood Protector  /  Natural - E003 - 100 ml
Hybrid Wood Protector  /  Natural - E003 - 100 ml
Hybrid Wood Protector  /  Natural - E003 - 100 ml
Hybrid Wood Protector  /  Natural - E003 - 100 ml
Package
Color
Netto 15 EUR + VAT 4 EUR

Hybrid Wood Protector - Colour and protection in one layer

RMC Hybrid Wood Protector is a real “single layer” product that can be used to color and protect almost all types of wood in one layer.

The oil protects wooden facades, terraces, shutters, gates, garden furniture and piers against discolouration and the effects of the weather.

Due to its ease of use and maintenance, this oil is an extremely user-friendly product.

  • Free from VOC (0%)
  • Allows overlap-free painting
  • Occupancy: ~ 30m2 / L
  • Drying time: 24 hours
  • Achieving water resistance: 36 hours
  • Packaging: 20 ml, 100 ml és 0,5 L bottle, 1 L és 2,5 L cans

For even more intense colour and deeper tones, use RMC Sunprimer HWP water-based primer before Hybrid Wood Protector.

Tip when using colorless (Pure) oil:

If you want to apply colorless (Pure) oil on a wooden surface that is exposed to direct sunlight (fences, shutters), it is recommended to treat the surface with UV-Stop before oiling. This is important because the colorless oil does not contain the pigments needed for UV protection, so the surface of the wood turns yellow / gray sooner when exposed to the sun (ie UV radiation).

For more information, please visit our website or colours.

Info
Details
Instructions
Details
  • Based on the RMC technology with an integrated UV stabilizer
  • Suitable for almost all types of wood
  • Also can be used to treat the exterior and the interior wood surfaces
  • Available in 12 classic and 8 fashion colours
  • Easy to apply and dries quickly
  • Economical - a minimum amount needs to be applied
  • It does not form a film layer, so it does not peel, does not peel off
  • Maintenance - with the same product, no need to sand
Info
Package
100 ml
Color
Natural - E003
Terméknév
HWP
Article No.
REHYWP0010E003
Weight
120.2 g/db
Instructions
  1. In the case of previously surface-treated wood, remove all residues from previous treatments.
  2. Clean the surface with RMC Exterior Wood Cleaner.
  3. Stir Rubio Monocoat Hybrid Wood Protector thoroughly before use until homogeneous.
  4. If the cleaned surface is completely dry, apply a coat of Rubio Monocoat Hybrid Wood Protector with a flat brush, RMC Scrubby Pad or RMC Brush Standard 220.
  5. Leave on for 10 minutes, then smooth the surface again with the same brush (without applying additional product).
  6. After 5 minutes, wipe off any excess oil with a cloth.
  7. Allow to dry for approx. For 24 hours. Full cure in 7 days.

Tips and tricks

  • Use only Rubio Monocoat products to prepare the wood.
  • The product should NOT be diluted under any circumstances.
  • Stir well before use. If you are using several vials at once, mix them in a bucket for a better result.
  • Never work in direct sunlight or in temperatures below 10 ° C.
  • Do not cover the surface or place heavy objects on it until it is completely dry.
  • Horizontal surfaces should be rubbed dry if rain is expected within 24 to 36 hours of oil application.