Precolor Fumed / Fume - 1 L

Precolor Fumed   /  Fume - 1 L
Netto 25 EUR + VAT 7 EUR

RMC Fumed - grayscale effect

The development of RMC Fumed was greyed out by the oak without the formation of harmful or irritating gases. The product reacts to tannic acids in wood and creates a creative colour effect. The result varies between a light and a very intense shade of grey.

Warning: This product is suitable for pre-treatment and does not protect wood. For maximum protection, it should be combined with one of the Rubio Monocoat finishing products, e.g. with Oil Plus 2C.

Specific characteristics

  • Gives a ‘greying’ effect to the wood.
  • Does not irritate, does not release any toxic fumes or vapours.
  • Can be diluted with water if the concentration is too high.

For more information, please visit our website.

Info
Details
Similar products
Instructions
Details
  • Physical state (20°C): liquid
  • Colour: colourless.
  • Odour: specifi c
  • Solubility in water: mixable

Warning

This product is suitable for pre-treatment and does not protect wood. For maximum protection, it should be combined with one of the Rubio Monocoat finishing products, e.g. with Oil Plus 2C.

Storage

Store the product in its original packaging for up to 12 months in a frost-free, dry place.

Info
Package
1 L
Color
Fume
Terméknév
Precolor Easy
Article No.
RIRUBI0100P501
Weight
1.101 kg/db
Similar products
Netto 47 EUR + VAT 13 EUR
Netto 70 EUR + VAT 19 EUR
Instructions

Directions for manual application 

  1. Sand the planks until the desired effect has reached.
  2. Remove any dust.
  3. Apply RMC Fumed regularly using a roller or a brush. If a smooth effect is required saturate the surface completely with the product.
  4. Let the surface dry completely (12 to 48 hours).
  5. Sand the surface lightly with a polisher equipped with a beige pad.
  6. Remove any dust again.
  7. Finish with Rubio Monocoat Oil.

Consumption - manual application
Depending on type of wood and preparation: +/- 20 to 40 g/m2. These usages are merely indicative. Results depend on wood type and method of preparation. It is always recommended to make a sample in order to calculate the exact usage.

Directions for industrial application

  1. Sand the planks until the desired effect has been reached
  2. Remove any dust.
  3. Apply RMC Fumed regularly using a roller or a spray gun. If a smooth effect is required saturate the surface completely with the product.
  4. Let the surface dry completely – to the air, with a drying tunnel or UV drying.
  5. Sand the surface lightly with a brush sanding machine, flutter or nylon.
  6. Remove any dust again.

Consumption - industrial application
Depending on type of wood and preparation: +/- 5 to 15 g/m2. These usages are merely indicative. Results depend on wood type and method of preparation. It is always recommended to make a sample in order to calculate the exact usage.